Glue and Adhesive Removal Microbe

GAR uses live strains of microbes that consume the active ingredients in glue and adhesives, dramatically reducing labor and tooling costs. Excellent glue grinding aid. GAR needs no neutralizing, and is the most effective glue removal on the market. GAR is completely organic and safe for all surfaces. It will not etch metals, concrete or plastics.- and is not a bond inhibitor. GAR is zero VOC, easy to use, and will save you an astonishing amount of labor.

Key Features:

• Safely removes glue, wax and adhesives without etching.
• Excellent surface preparation cleaner for areas that are going to be sealed or coated.
• GAR does not need to be neutralized and will not leave a residue on the surface.
• Excellent grinding aid to remove glue including pressure glue.
• Penetrates into all cracks, crevices and pores of the various surfaces in bathrooms and kitchens where organics accumulate, leaving them visually cleaner.
• BCM provides long-term odor control by removing the organics that cause odors and preventing the return of odor causing compounds.
• Eliminates the need for excessive pumping in janitorial tanks and waste treatment facilities. The microbes will consume toilet tissue, hair, starches, and proteins that cause the tank and drain fields to become plugged.
• Certified with the NSF Nonfoods Compounds Registration Program.

Read entire label before using.

As a grinding aid, spray liberally on area to be processed prior to set up. Grind as usual. GAR begins working immediately. 

For intense/thick glue removal, Wet the surface and apply the microbes with a sprayer. You’ll yield at least 250 sqft per gallon of GAR.

Saturate surface with water. Spray GAR at a minimum of 250sqft/gal. Scrub the entire area thoroughly with a stiff broom or mechanical scrubber. Do not let dry. Add more water to surface if needed, avoiding puddling. Cover with plastic overnight. Upon return, remove plastic and broadcast sand to rejection. Scrape and dispose of contamination. Rinse

Thick glue may take 3 to 4 hours or overnight for the microbes to completely digest all the contamination. Upon completion, rinse thoroughly with clean water wet vac the microbes from the floor. 

Microbes do not etch concrete, contain no caustics or acids and are PH Neutral.

Always test product.

Cleaning of Equipment:

Rinse pump up sprayer with regular tap water, warm or cold.

• BCM has a 2 years shelf life after opening the container.
• Close container tightly after each use.
• Store in original container only.
• Store in and use in temperatures between 40 degrees F and 120 degrees F.

Contact Microbial Remediation of Florida, LLC. 

For distribution information 772.501.3324

• Location: Vero Beach, FL
• Item Code: Biological Contamination Microbe Concentrate.
• Package: 2 or 5 gallon bucket or 53 gallon drum.

250-400 square feet per gallon

For technical assistance, contact Microbial Remediation, LLC.

772.501.3324

Click Here For SAFETY DATA SHEET